BIN SITE FOR SALE
250,000 Bushel Storage - LaMoure, ND
Price: $975,000
 
 
Property Note:  This facility has a great location, just off Main Street in LaMoure, ND. Easy access and adjacent to the local elevator. This site has 250,000 bushels of grain storage, 2 additional 10,000 hopper bottom bins, a Meyer commercial grain dryer, Warrior grain leg system, and 6 car railroad spur.
All bins are filled by grain legs dumping into grain pumps that were installed in the 2013. 250,000 bushel storage capacity consists of 3 – 50,000 Brock bins and 4 – 25,000 bushel Butler bins.
Grain bin setup, grain leg setup and site work was done by Gateway Building Systems, Inc.
Location: Located on the south side of the railroad tracks, at the corner of 1st Street SE and Center Ave. in LaMoure, ND.
Contact:  Lindsey Brown at Pifer’s Auction and Realty at 877.700.4099 or 701.371.5538 for more information or a complete catalog.
 
 
 
 
Property Information:
Lot Size: 30,000 sq. ft. site +/-, leased indefinitely from Red River Valley & Western Railroad Company, and BNSF Railway Company.
Parcel #: 33-0751007
Taxes (2017): $5,608.43
 
Grain Storage and Grain Handling Equipment include:
3 – 50,000 bushel Brock Grain Bins with floor aeration systems and power sweeps.
4 – 25,000 bushel Butler Grain Bins with floor aeration systems and power sweeps.
2 – 10,000 Micada hopper bottom bins.
1,100 bushel Lowry dump pit.
Meyer Commercial tower dryer – rated at 1,000 bushels per hour.
Warrior Grain Leg system 12' x 12' x 95'
Hutchinson grain pump with grain leg and conveyor system.
7,900 gallon propane tank
6 car rail spur.
 
Grain Receiving and Handling System
1)   Pit Receiving System
To Include: - T & H 110 Bushel, Double Hopper Receiving Pit
-       Two (2) 10” Heavy Duty Unload Augers with 3/16’ Auger Tube and ¼” Auger Fllighting
-       Two (2) Dodge Screw Auger Reducer Drives with 15 Hp, 3 Phase Motors
-       8’ x 25’ x 1’ Thick Base Pad to sit the Pit on and Anchor to
-       3/16” Checker Plate Steel over Truck Path to Reduce Grate Opening to 5’25’
-       Rubber Drive over Cover for Grate Opening
-       Drain tile around base pad and a Vertical Sump Tube (sump pump is NOT included)
2) Grain Leg and Tower System
To Include:
-       12’ x 12’ x 95’ Warrior Leg Support Tower with a wrap-around stairway system and two levels of service platforms
-       s-M Howell, Model 30, 6,000 BPH Main Receiving Grain leg with a 95’ Discharge Height, 13” Belt with 12 x 6 cups on 6” centers, Dodge TA 5215H15 Class II Reducer Drive and a 25 Hp, 3 Phase Motor
-       Schlagel 12” x6 Duct, Double Swing Set Distributor with Manual Controls
3) Spouting
    To Include:
-       1-12” x 48’ 10 Ga., Powder Coat Painted Spout with a Single Star Cable Truss Kit, Deadhead, Expansion Joint, Elbows, Rings and Clamps from Distributor to Top of Farthest East 30’ Bin
-       1-12” x 58’ 10 Ga. Powder Coat Painted Spout with a s Single Star Cable Truss Kit, Deadhead, Expansion Joint, Elbows, Rings and Clamps from Distributor to Top of The North New Hopper Bin.
-       1-12” x 55’ 10 Ga., Powder Coat Painted Spout with a Single Star Cable Truss Kit, Deadhead Expansion Joint, Elbow, Rings, and Clamps from Distributor to Top of The South New Hopper Bin.
-       Hard Covers on the Top of the Hopper Bins.
4) Crossing Grain Pump over 30’ Bins
    To Include:
-       10” x 87’ Hutchinson Grain Pump with a Tail Driven 10 Hp Motor and Weasler Reduction Drive.
-       Two (2) H-Frame Eave Stands
-       Two (2) Roof Support Rings
-       Two(2) Hard Covers
-       Two (2 Cable Controlled Intermediate Drops
-       One (1) Cable Controlled Head Gate
5) Concrete Work
    To Include:
-       Base Foundation for the 12 x12 Leg Tower. This Consists of four *4) 15’ Deep x 24” dia. Holes augured out, then rebar cages placed in the holes and filled with concrete. Then a 14’ x 14’ x 3’ top cap with anchor bolts or plates for the tower (approx.. 30 yrds of concrete)
-       Two (2) commercial hopper bin concrete foundations for 24’ dia. Hopper bins. This includes the concrete, rebar, form materials, and labor to pour. (approx.. 18 yrds per pad)
 
6) Wet Grain Reclaim Augers from Hopper to Wet Leg
    To Include:
-       Two (2) approx.. 20’x10” Hutchinson Augers with heavy duty flighting and galvanized outer tube. Each has a reduction drive, inlet hopper with a tail bearing, mounting and bracing steel transition steel, and inlet box to the wet leg.
7) Truck Load Out Auger
    To Include:
-       30’ Hutchinson 12” Heavy Duty Auger with a 3 to 1 Gear Reduction Chain Drive, Tail hopper with a bearing.
-       10 Hp, 3 Phase Motor
-       Mounting Bracket for supporting the auger from the hopper frame
-       Cable Supports from head of auger back to the bin
-       3’ Flexible Metal Bucket Drop spout to combine grain as it discharges
-       Hand controlled 12” rack and pinion gate, added to the hopper cone near the bottom of the cone
8) Two (2) 48’ Dia. X 33’ Eave Brock Farm Bin (56,844 Bu per Bin)
    To Include:
-       Two (2) inside ladders
-       One (1) Shur Step Stairway (shared between bins)
-       Two (2) roof handrailing from eave to peak
-       Twenty (20) roof vents (10 per bin)
-       48’ Brock Tri-Corr Full Floor Aeration System with Parthenon Floor Supports
-       10” U-Trough Power Sweep Unload with a horizontal power head gear, reduction sweep grip drive wheel and 15 Hp. 3 phase motor
-       10 Hp., 3 phase low speed centrifugal fan & transition
-       Brock Engineered concrete foundation to include; concrete, rebar, forms and labor to pour, and labor to place/pack fill gravel inside forms (based on 3,000 PSF Soils)
**Additional 48 x 33 Brock Bin
9) Meyer Commercial Tower Dryer
         To Include:
         *Pressure Heat/Suction Cool
         *Pressure Heat/Pressure Cool
         *Full Heat (Dumping Hot)
                           - Gravity Fed; No Leveling Augers
                           - Heavy duty roll formed 18 gauge perf. grain columns
                           - Outside Screens are 304-18 Gauge Stainless
-       Variable Width Grain Column to increase efficiency
-       Two(2) 30 Hp TEFC Baldor Motors with 1.15 Serv. Factor
-       Two (2) 40 ¼” Air Roil Backward Curve Blowers
-       Two (2) Access platforms with OSHA Rails, Safety Cage and Ladder
-       Fifth access platform made by the Partial Service Platform
-       Automatic shut down and Maxon safety gas valve
-       High eff. Low pressure drop Make-up air burner (with stainless steel baffles)
-       Circular paddle drag type unload system with AC Drive
-       Quantum Control Panel and operation system wich includes:
o   Burner Cycle Timer, Automatic “Moisture controller”, Batch Timer Kit, Alarm horn, Silent no gain shutdown, C.F. Aux. unload delay Timer, Monitor Alarm timer, cool down timer, exit grain temp limit, unload rate limit, web grain sampler, trouble shooting, parts and service manuals and dryer log.
-       One (1) level of Moisture Equalizers for more evenly dried grain
-       Flat plate moisture sensor at Inlet and Discharge of dryer
-       IEC Ambient Compensated Motor Starter and motor circuit protectors
-       Commercial package (Exhaust Air limits) Maxon Gas Safety Valve
-       Propane Internal Vaporizer
-       230 Volt, 3 phase, electrical system
-       Bin level switch in top garner to start up to 10 Hp motor (rotary style)
-       Electrical Disconnect box
10)            Wet Grain Fill System to Dryer
To Include:
-       One (1) 58’ x 4,000 BPH Wet Grain S-M Howell Bucket Elevator
-       8” (4,000 BPH) x 14’ Hutchinson Grain Pump to carry grain from wet bin to wet leg with 3 Hp, 3 phase motor
-       10” Y-Style Two-way valve at Discharge of Wet Bin. Unload to put grain direct into grain pump or a fill auger (Truck Fill Auger not included)
-       Spout from leg to dryer with deadhead
11)            10’ Cross Conveyor Grain Pump Crossing 3-48’ Bins
To Include:
-       10” x 133’ Hutchinson grain pump with two intermediate drops, a head gate and a 20hp, 3ph motor
-       Three (3) center support stands
-       Three (3) Bin hard covers
-       Two (2) eave support stands
-       One (1) heavy H-Tower